The majority of our master bedroom efforts dealt with the interior aesthetics and function of how we use and can most enjoy the interior of our bedroom. From the closet build to the fabric and accessories choices, the purpose all along was to turn a place we spend a third of our lives into a space we could comfortably enjoy.

That being said, two elements in the room needed some attention that had to do far more with the function of an exterior item. The two windows in the front of our bedroom are two of our home's five remaining original 125 year old windows.

These windows are great examples of double hung weight and pulley sash with original weights and wavy glass. The problem is, they've not really been cared for over the years. Some of the the sash cords were broken, the upper sash had been painted shut, paint has been applied so heavily to the frame that one sash couldn't open fully, the sills were rotted after years of neglect, and the original construction had a fairly significant design flaw that allowed water to collect at the bottom of the lower sash and make its way into the wall, causing this just beneath the paint.

I knew the windows had to be restored, and the sash would be a bigger job down the road, so my goal during our bedroom project was simply to restore the window boxes, sash ropes, and get the sash back into operation while also correcting the design flaw.

I started by working to free all of the sash and remove them from the window frames. The process started by carefully removing the sash stops from the interior of the window frame, followed by removing the parting beads. I had to work very slowly and methodically to save as many of the pieces of wood as possible. Anything I break will need a custom fabricated replacement to match the original, and I've prefer to do as little custom fabrication as possible.

Once the sash stops were removed, I was able to remove the lower sash from the unit. I say unit because these windows, as with windows today, we're delivered from the local lumber yard as complete units. Here's and example of a window in the Smoot lumber yard showroom that is very similar in construction to our windows. Most likely, our windows also came from the local Smoot lumber yard, which was only a few blocks from our house when it was built in the 1880s.

I cut the remaining sash cords from the lower sash and removed it entirely from the frames. With the lower sash gone I turned my attention to the upper sash. They were painted shut from the inside and the outside, so I had a task ahead of me.

I was able to somewhat easily cut away the paint inside, but how could I cut the outside paint? I didn't want to climb a ladder nearly 30 feet above the sidewalk (Wendy wouldn't have allowed that), so I had to come up with a better way. That's when I had a good idea.

I duct taped my Fein oscillating tool with a cutting blade to a long piece of 1" x 2". Then I was able to turn on the cutter and work the stick from the inside and guide the tool to cut the paint that was holding the upper sash hostage. It only took me about 15 minutes to free both upper sash.

With the lower sash and parting beads removed, I was free to remove the upper sash from their positions, which revealed sash ropes in good shape and two more sets of sash pulleys. I then removed the sash pulleys in order to strip the many layers of paint that had been applied over the last hundred years. 

These cast iron pulleys are all in great shape. It was very cool to strip the paint and see a patent date of Feb 1879 stamped right into the face. 

I'll tell you one thing, it was super weird not having any sash in the window openings. I was doing this work during the summer, so we only had to worry about the hot weather, not the cold of winter.

Once the widows and hardware had all been removed I turned my attention to restoration. My first task was to remove the badly damaged and beaten zinc weather stripping. It had done its job, but those days were over and it needed an update. I also began stripping all of the this paint from around the window frame. I'll tell you one thing for sure, it was not easy. I didn't use any chemicals on this, just a scraper and elbow grease. After a few days of scraping we had ourselves a perfectly clean window box just waiting for a fresh coat of paint.

I mentioned the design flaw that let water into the window. The sash pockets have two little doors in them so you can access the weights. Well, these doors in most windows don't go all of the way to the base of the window unit, which keeps any water than accumulates beneath the sash out of the wall. Unfortunately, in our windows these little doors go all of the way into the bottom of the unit. This has allowed rain to sneak inside of the window box, into the wall, and ultimately caused a significant amount of damage to the plaster and rot to the wood. You can see just what I'm talking about in this photo.

This left the weight pocket door loose, wobbly, and poorly secured due to rot at the bottom of each piece. Some were worse than others, but all had issues.

I decided to resolve this century and a quarter long design flaw once and for all. We were putting a lot of time and effort into fixing the molding and plaster, so the last thing I wanted to deal with is more damage after everything was corrected. 

Using an old piece of salvaged and tight grain old growth pine I cut a small piece that fit perfectly in the weight pocket opening. I then cut a significant angle in the piece and affixed it in the openings with copious amounts of glue, a few small nails, and finally a little all weather caulk right at the joint. The end result is a weathertight seal at the base that will effectively keep water from falling into the weight pocket.

It's also worth noting that I used the old and salvaged wood to ensure a long lasting fix. Newer pine runs the risk of expanding/contracting more and ultimately allowing water back where we don't want it. And if water gets on new pine, it rots and deteriorates much faster.

My work continued on the window frames for about three days total, which left us with several days of partially or completely open windows without sash. During this period we ended up hanging plastic to keep most heat and weather out, and got lucky with sunny and mild days the whole time.

Our house definitely looked a bit condemned/suspect during those days. Our neighbors were selling their house at the time, and I wonder if anyone going through their house said something along the lines of, "It's nice, but did you see the sort of rough shape the house next door is in?"

With everything stripped, patched, sanded, and corrected, we were looking at windows that were finally ready to be put back together.

We placed the sash pulleys back in their pockets using the orignal screws and ran new sash cord. I have to apologize as I don't have any of the re-cording photos, but we'll be working on another window pretty soon so I'll be sure to thoroughly document it. After a few hours of measuring and effort we had ourselves four completely functional window sash.

We also added spring bronze weather stripping to give it a more weather tight seal, much like we did with our front door.

We still have a lot of work to do on the window sash, but that will need to wait until I'm finished with the storm windows. The sash will need to be out for quite a while and I don't think a little plastic hanging in the opening will cut it during that time. We'll surely keep you posted on that aspect of the project.

This project is one of those examples that I want to use to show the value of an old window. Many assume "old window = inefficient window." In reality, an old window that is properly maintained and has a storm window applied is as efficient, if not more efficient than its modern counterpart. Not to mention that modern windows will only last you about 30 years, whereas this properly maintained window should last another hundred years or more. 

Do you have a home with old windows? Do you prefer the look of old to new? Would you go to the trouble of saving your old windows, or are you of the mindset of "out with the old, in with the new"?

Comments 11

Comments

Heather
3/15/2013 at 2:30 PM
We have a 1905 Victorian with a number of original windows. We also restored our windows and went through a similar process, but without having to deal with the design flaw for water. Shortly after purchasing our house and restoring the windows, we had custom and true-to-character storm windows made to replace the horrid aluminum storms that had been in place. The new storm windows were a great addition.

I cringe at the thought of (or sight of others)replacing the original windows...
Alex
3/17/2013
I'm still working on the wood storms for our house but know exactly how you feel about the old aluminum triple tracks we removed years ago. I can't wait until I'm done with that project when I consider the changes it will make to the house in the way of noise reduction and insulation. I will miss the look of the windows from the exterior, but I think it's necessary.
Monique
3/15/2013 at 8:59 PM
What a huge undertaking! You guys continue to amaze me with your DIY talents.
Alex
3/17/2013
Thanks, Monique. I'd reserve judgement on us until we actually complete the windows. :-) It's been a few years in the making but I have high hopes.
bfish
3/15/2013 at 9:21 PM
I agree with Heather -- just the thought of replacement windows sets my teeth on edge! Our house is a newer than yours (late 1920s) but because we have many, many windows the vinyl replacement salespeople come around pretty frequently, apparently thinking that we must be dying to get more efficient windows. Ugh, no thanks!

Some weights need to be fixed or replaced but all of the windows work and we're willing to trade off some draftiness that would be eliminated by new windows and storm windows by compensating with a modern and efficient heating system and central AC.

Since our sunroom -- all big windows, no walls -- "leaks" the most in all seasons, and we don't need to open the windows for ventilation, I would like to get interior storm windows (plexiglass?). Do you know anything about these? We don't want to alter the appearance of the original windows by using storm windows. (We have original heavy-duty wood-framed screens for many of the windows, but apparently none were ever used on the sunroom.)
Alex
3/17/2013
I always laugh a little when we get mailers for replacement windows because they are so far off base in their blanket marketing.

Our sun porch full of single pane glass just placed in the various openings is our draftiest room, and the windows don't even open. Since they are not even close to original in our house I hope to eventually replace all of them with functional and all wood divided light casements (so out swinging under the back roof). Won't be for a very long time, but I can see it in my head.
bfish
3/17/2013 at 4:58 PM
Oh Alex, I neglected to mention that our house is all wood which makes us an even more attractive bait for those "home improvement" contractors -- vinyl up that siding and get new windows while you're at it they preach.

Our sunroom windows are double-hung, 8 over 8, but true divided light wood casements would be the dream replacement and very true to our home's style -- but that will have to wait for a lottery win or some equally unexpected windfall.
3/19/2013 at 11:30 AM
This is something we need to do, but again, getting the time to do it is the hard part. All of our windows are original except for three out of a total of 38. The three replacements are hideous 1950s aluminum, so we plan to eventually have reproductions made for those.

Any words of encouragement on how to best tackle this job? I know I'm going to have to disassemble, re-glaze, re-paint, and install new sash chain.
DebMcP
11/9/2013 at 10:50 AM

Keep up the great work! As you've said elsewhere in the blog... it's a journey, not a destination.

Those aluminum triple-track storm windows have a heck of a lot to answer for! The cold, the drafts... the complete UGH factor... Our home hasn't been more lovely or more comfortable than since we replaced three 1970s aluminum storms with wood replacement storm windows (the 8 over 2, and 6 over 2 divided lite pattern).
Priming and painting them carefully and in a controlled environment and letting them cure up for months before we mounted them has made such a difference in how they've weathered these winters. It's been 8 years and we don't see any signs of them needing touchups. It's all in the prep.

Jane Derrick
8/1/2014 at 12:35 PM

Have you or anyone you know come across an old house window that has no access panel to replace the sash cord? The wooden panel that has the pulley guide in it is one piece from top to bottom and there are no screws evident holding in the trim piece that holds the window in. Any guidance is appreciated. Thank you

Alex
8/1/2014

I've seen it once or twice and it seems both rare and unfortunate. Double check extra close, look higher up, etc, it may be there. But if it's not there, you still have an option. It's possible you could remove your window casing on your interior wall and still get in to the weights. You end up doing a lot of cutting into things you'd rather not, but it can work this way, assuming the window was constructed in a way to allow access from the front. If those were my windows, I'd probably remove the sash and get access that way and then cut a door for future use with an oscillating tool and a guide. Best of luck.

Since you've not signed in yet, you will need to fill in your name and email below. If you have a Facebook account, save yourself a step and use Connect to login.

Denotes a required field.

Please enter full URL, including http://

You can use Markdown syntax in your comment. And you can also use lots of Emoji!
  • Search

  • Login
  • Follow
  • Advertising

If you're looking for information on advertising and sponsorships, head on over to our sponsorships page. You can purchase site sponsorships in a few easy clicks. 

Toolbox Tuesday
Open Housing
  • We're Featured!

Old Town Home has been featured in the following places and publications:

The Washington Post
 
Washingtonian Magazine
 
Domino
 
Old House Journal
 
 
Apartment Therapy House Tour
 
Washington Post Express Feature
 
Home & Garden Blogs
 
© 2024 OldTownHome.com. - Privacy Policy
Login Below
or
Sign in with Facebook
Connect

Unexpected Error

Your submission caused an unexpected error. You can try your request again, but if you continue to experience problems, please contact the administrator.

Working...

Working...